Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Time Based Test Features

May 04, 2020

1. OPEN THE FTMANAGER SOFTWARE AND OPEN YOUR CURRENT TUNE FILE

PRODUCTS NEEDED:

👉 ANY POWERFT ECU

👉 SWITCH PANEL CONTROLLER

👉 STAGING / BRAKE CONTROL SOLID STATE RELAY

👉 NITROUS SOLID STATE RELAY

2. NEXT, IN THE QUICK ACCESS PANEL UNDER DIAGNOSTIC PANEL, GO TO TEST TIME BASED FEATURES.

3. CLICK ENABLE

4. ONCE ENABLED, SELECT THE ENGINE RPM, TPS, MAP AND TEMPERATURES YOU WANT THE ECU TO STIMULATE

5. MAKE SURE TO TURN ON ANY ARM SWITCHES FOR NITROUS, ETC.

6. PRESS AND HOLD YOUR 2 STEP BUTTON AND THE TEST WILL BEGIN. YOU WILL SEE THE GREEN TIMER START COUNTING UP, THIS FEATURE WILL RUN ALL TIME BASED OUTPUTS AS IF THE CAR WERE GOING DOWN THE TRACK

Also in Tech Support Articles

How to Set-Up the Multifunction Button

August 29, 2024

By properly setting up the Multifunction Button on your FuelTech ECU, you’ll gain precise control over critical functions like line lock, staging, and boost + scramble, ensuring your vehicle is ready for the track. This configuration allows you to maximize performance, streamline your racing setup, and focus on what matters most, winning!

How to Set Up a 4L80E or 4L85E Transmission with FTManager

August 29, 2024

Setting up your 4L80E or 4L85E transmission with FTMANAGER delivers precise and reliable transmission control. In this guide, we’ll walk you through the necessary steps to configure your FuelTech ECU for seamless integration with these powerful GM transmissions.

How to Set Up a 4L60E or 4L65E Transmission with FTMANAGER

August 29, 2024

Setting up your 4L60E or 4L65E transmission with FTMANAGER provides precise and reliable transmission control for your vehicle. In this step-by-step guide, we’ll walk you through how to configure your FuelTech ECU for seamless integration with these popular GM transmissions.