Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Staging Control

March 30, 2020

PRODUCTS YOU WILL NEED:

👉 STAGING / BRAKE CONTROL SOLID STATE RELAY

👉 SEALED RELAY HOLDER

1. Wire the relay like below.

2. Open the FTMANAGER software and go to Map Options to enable Staging Control.

3. Next, find drag racing features in the quick access panel and click Staging Control / Transbrake, select your button activation mode and output activation mode.

4. Now go to your Inputs Screen and select the inputs you want to use for your Transbrake / 2-step button and your staging button.

5. Go to your Outputs Screen and assign your transbrake output to the output you wired your staging control rely to.

6. Once this is all configured, you can go back to the staging control feature and adjust your Staging Intensity and Frequency to make the car stage smoothly when the staging button is pressed.

* Each car and transmission is different. However using the values 20% and 15 HZ is a good starting point to work from.

Also in Tech Support Articles

How to Set-Up the Multifunction Button

August 29, 2024

By properly setting up the Multifunction Button on your FuelTech ECU, you’ll gain precise control over critical functions like line lock, staging, and boost + scramble, ensuring your vehicle is ready for the track. This configuration allows you to maximize performance, streamline your racing setup, and focus on what matters most, winning!

How to Set Up a 4L80E or 4L85E Transmission with FTManager

August 29, 2024

Setting up your 4L80E or 4L85E transmission with FTMANAGER delivers precise and reliable transmission control. In this guide, we’ll walk you through the necessary steps to configure your FuelTech ECU for seamless integration with these powerful GM transmissions.

How to Set Up a 4L60E or 4L65E Transmission with FTMANAGER

August 29, 2024

Setting up your 4L60E or 4L65E transmission with FTMANAGER provides precise and reliable transmission control for your vehicle. In this step-by-step guide, we’ll walk you through how to configure your FuelTech ECU for seamless integration with these popular GM transmissions.