Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

New Product | Peak and Hold PRO Injector Driver

March 15, 2022

Modern EFI-equipped racing engines rely on low impedance fuel injectors due to the enormous fuel volume demands, however controlling these injectors requires a special control box. The controller is required because there is a higher current at opening stage (peak) and lower current when opened (hold), otherwise the injector can quickly warm up and burn out. FuelTech PowerFT engine management systems rely on the company’s Peak and Hold Injector Drivers to accomplish this task and the renowned technology company recently released a new product to bring fuel injector control to the next level.


The Peak and Hold PRO replaces the original injector driver products in a single part number, giving the tuner more control and safer operation of any low impedance fuel injectors. For those unaware the low impedance fuel injector features an internal coil resistance of less than 7 Ohms while high impedance injectors are greater than 7 Ohms. The lower resistance allows the injector to have shorter response time and is a major factor in the extremely high flow capabilities of modern racing injectors.

One of the most obvious highlights of the new Peak and Hold PRO Injector Driver is its ability to adjust the amp output for the fuel injectors. The previous Peak and Hold products were offered in three different amp outputs and the user had to reference a chart on the website to determine which Peak and Hold amperage was required for their fuel injectors. The new Peak and Hold PRO is programmable, meaning no more research when buying the product and it eliminates the need for a box upgrade when changing fuel injectors.

The new Peak and Hold PRO also offers two-channels per unit giving a single box the ability to control 8 fuel injectors and two boxes for 16 injector applications. The previous generation is a single-channel unit, requiring two boxes for 8 injectors and four boxes for 16 injector combinations. Additionally, twin Peak and Hold PRO applications have the ability for each box to drive two different amp outputs, allowing the tuner to control two different types of injectors. For example, in 16 fuel injector combinations the first set might require four amps while the second set runs on eight amps—both boxes can be programmed independent of each other.

FuelTech didn’t stop at the programmable and multi-channel upgrades; it also includes diagnostic capabilities in the system to prevent problems and catastrophic failures. The Peak and Hold PRO can perform a quick pulse of the injectors at the push of the start button to ensure all injectors are connected and operating properly. If it detects one or more injectors not opening/closing correctly, it will activate a warning signal on the LED screen of certain PowerFT ECUs (FT450, FT550, and FT600) and not allow the engine to start up.

Another fail-safe feature is the Peak and Hold PRO’s ability to shut off all the fuel injectors while the engine is running if one or more injectors fail due to a broken clip or another reason. Engines that run 16 injectors and two Peak and Hold PRO units also benefit from the fail-safe shutoff. The two units communicate through a wired connection and both boxes will shutoff if one injector stops working in either system.

The Peak and Hold PRO operates on CAN communication, allowing all of the information to record on the FuelTech data log and be viewed in FTManager. The FuelTech engineers also upgraded the connector to a user-friendly version that doesn’t require special tools for pinning. It is the same connector on the Alcohol O2 conditioner and FuelTech offers jumper/adapter harnesses for old Peak and Hold box users to easily swap to the new one with minimal effort. Like the FTSPARK and FTSPARK II, the new version is built in the same enclosure as the previous generation to allow customers to use the same mounting solutions in their racecars.

Continually advancing technology to keep up with today’s fast-moving racing aftermarket is the reason you’re seeing #FuelTechEverywhere




Also in FuelTech Blog

FuelTech Supports Veterans Empowerment Organization: Honoring National Veterans and Military Families Month
FuelTech Supports Veterans Empowerment Organization: Honoring National Veterans and Military Families Month

November 01, 2024

At FuelTech, we believe that honoring veterans goes beyond words—it requires action. That’s why we’ve chosen VEO, an organization that has been instrumental in providing essential resources to veterans transitioning back to civilian life. With each purchase of our FuelTech U.S. Military T-Shirt and Hoodie, a portion of proceeds will go directly to VEO to assist veterans with housing, job training, mental health support, and career placement.

Read More

FuelTech’s Black November Sale 2024!
FuelTech’s Black November Sale 2024!

November 01, 2024

Save big with FuelTech's Black November our largest sale of the year, featuring exclusive discounts on our most popular products!

Read More

Bracket Racing with FuelTech: Precision and Consistency for the Win
Bracket Racing with FuelTech: Precision and Consistency for the Win

September 30, 2024

FuelTech's advanced engine management systems, data logging, and tuning capabilities provide racers with the tools they need to achieve repeatable performance. Here’s how FuelTech can transform your bracket racing experience: Precision Tuning for Consistency, Data Logging for Performance Analysis, Reaction Time Optimization, and Traction Control for Consistent Launches.

Read More